Effects of physical and chemical characteristics of surface sediments in the formation of shallow lake algae-induced black bloom

Surface sediments are closely related to lake black blooms. The dissolved oxygen （DO） distribution and its penetration depth in surface sediments as well as the migration and transformation of redox sensitive elements such as Fe and S at the sediment-water interface are important factors that could influence the formation of the black bloom. In this study, dredged and undredged sediment cores with different surface properties were used to simulate black blooms in the laboratory. The Micro Profiling System was employed to explore features of the DO and ∑H2S distribution at the sediment-water interface. Physical and chemical characteristics in sediments and pore waters were also analyzed. The results showed that sediment dredging effectively suppressed the black blooms. In the undredged treatment, DO penetration depth was only 50 μm. Fe^2＋ concentrations, ∑H2S concentrations, and ∑H2S production rates were remarkably higher in surface sediments and pore waters compared to control and dredged treatments. Furthermore, depletion of DO and accumulation of Fe^2＋ and ∑H2S in surface sediments and pore waters provided favorable redox environments and necessary material sources for the blooms. The study results proved that physical and chemical characteristics in surface sediments are important factors in the formation of the black bloom, and could provide scientific guidance for emergency treatment and long-term pre-control of black blooms.     

Simultaneous preconcentration of cadmium and lead in water samples with silica gel and determination by flame atomic absorption spectrometry

A new method that utilizes pretreated silica gel as an adsorbent has been developed for simultaneous preconcentration of trace Cd(II) and Pb(II) prior to the measurement by flame atomic absorption spectrometry. The effects of pH, the shaking time, the elution condition and the coexisting ions on the separation/preconcentration conditions of analytes were investigated. Under optimized conditions, the static adsorption capacity of Cd(II) and Pb(II) were 45.5 and 27.1mg/g, the relative standard deviations were 3.2% and 1.7% (for n = 11), and the limits of detection obtained were 4.25 and 0.60 ng/mL, respectively. The method was validated by analyzing the certified reference materials GBW 07304a (stream sediment) and successfully applied to the analysis of various treated wastewater samples with satisfactory results.     

2006年～2012年内蒙古自治区新建火电项目NOX排放情况及其减排形势分析

通过统计2006年至2012年内蒙古自治区内新建火力发电项目NOX治理和排放情况,并结合目前火电厂主流脱硝技术以及国家和自治区对NOX减排的相关要求,对自治区“十二五”期间NOX减排形势进行分析.     

平凉市道路噪声监测结果分析

本文通过对平凉市2008～2012年道路交通噪声进行统计、分析,并针对道路噪声控制提出解决措施。     

天津市环境空气中恶臭感官定量评价分析

为研究环境空气恶臭污染特征,以天津市区为研究区域,分别在夏秋两季对天津市内六区的环境空气中恶臭感官浓度进行了监测。结果显示,在观测期间臭气浓度在限值（以《恶臭污染物排放标准》厂界臭气浓度限值20作为参照）范围以内的样品数量夏季占63％,而秋季占18％;通过多元线性回归方法建立了典型恶臭污染物与恶臭感官浓度的定量表达式,计算出典型恶臭污染物对市区环境空气的臭气浓度贡献率占59％。通过对实测值与预测值的拟合情况的分析,表明该回归方程可以较好的预测天津市环境空气中夏季恶臭感官浓度。     

低C/N条件下MUCT工艺数学模型的参数校正与验证

基于ASM2d模型建立了稳定运行的MUCT工艺营养物质去除过程的动力学反应模型,比较各种COD、TN、NH 4＋-N、TP的实测值和模拟值,以确定系统在低C/N条件下运行时的动力学和化学计量学参数.模拟结果表明,稳态模型中的动力学参数qPHA、KA、KPP、YPO3-4、μAUT和ηNO-3分别取值2.90 g.（g.d）-1、3.85 g.m-3、1.35 g.（g.d）-1、0.35、1.6和0.8.其他的动力学和化学计量学参数可采用IWA给出的默认值.     

Minimizing leakage from a smelter off-gas system by enhanced control

The off-gas handling system is a vital component of a smelter and it is essential that it operates in accordance with environmental regulations. A key feature of the off-gas management system is maintaining a slightly negative system pressure to prevent gas leakage, such as SO₂, out into the work and external environments. To enhance sustainable development, there is also growing interest in capturing and reusing the significant amount of heat and CO₂ contained within off-gas. The potential incorporation of heat and CO₂ recovery systems places importance on enhancing control to minimize the risk of both gas leakage and disturbance of the smelting process. With these requirements in mind, an easily implementable feedforward control enhancement to existing control schemes is proposed to help provide improved performance.     

“十二五”地表水国家环境监测网络吉林省水环境国控监测点位布设的构想

根据国家环境质量监测网络,对“十二五”地表水环境质量监测断面调整工作要求,吉林省在辖区内所有水环境质量监测断面及采样点基础上,完成了松花江流域和辽河流域国控监测断面的优化调整工作。在此过程中,如何从国家尺度上,既能充分反映吉林省水环境质量状况,又能满足国家对地表水环境管理需求进行了深入思考。本文以吉林省为例,在确定国控监测断面及采样点的布设中．提出了自己的构想和建议。     

Beyond hypoxia：Occurrence and characteristics of black blooms due to the decomposition of the submerged plant Potamogeton crispus in a shallow lake

Organic matter-induced black blooms(hypoxia and an offensive odor) are a serious ecosystem disasters that have occurred in some large eutrophic shallow lakes in China. In this study, we investigated two separate black blooms that were induced by Potamogeton crispus in Lake Taihu, China. The main physical and chemical characteristics, including color- and odor-related substances, of the black blooms were analyzed. The black blooms were characterized by low dissolved oxygen concentration(close to 0 mg/L), low oxidation-reduction potential, and relatively low pH of overlying water. Notably higher Fe2+and∑S2-were found in the black-bloom waters than in waters not affected by black blooms. The black color of the water may be attributable to the high concentration of these elements, as black FeS was considered to be the main substance causing the black color of blooms in freshwater lakes. Volatile organic sulfur compounds, including dimethyl sulfide, dimethyl disulfide, and dimethyl trisulfide, were very abundant in the black-bloom waters. The massive anoxic degradation of dead Potamogeton crispus plants released dimethyl sulfide, dimethyl disulfide, and dimethyl trisulfide, which were the main odor-causing compounds in the black blooms. The black blooms also induced an increase in ammonium nitrogen and soluble reactive phosphorus levels in the overlying waters. This extreme phenomenon not only heavily influenced the original lake ecosystem but also greatly changed the cycling of Fe, S, and nutrients in the water column.     

中国石化炼油企业QHSE管理体系典型建过程研究

总结了中国石化炼油企业构建QHSE管理体系的典型步骤和内容,描述了体系构建各阶段的工作和要求,并提出了构建QHSE管理体系过程中的关注要点.